I had picked up these crimp tubes at A.C. Moore, because I thought they might be used on a gun or as a bolt, and to my luck, they would come in handy.
So, the first thing to do is to snip the post on the anklet where the post shows through, but leave 1/16 of an inch so the crimp tube can peek through the hole slightly. Sand the post smooth and then put the 3 pieces together. After they are assembled, using a pair of tweezers, push the crimp tube through the hole in the anklet panel until it stops. Now you have modded the anklet, and improved the look of your model.
The crimp tube can be removed for painting, leaving the "seal" chrome or it can be painted to blend in to the anklet. I think I might leave it chrome, but we'll see when final paint goes on.
So, the first thing to do is to snip the post on the anklet where the post shows through, but leave 1/16 of an inch so the crimp tube can peek through the hole slightly. Sand the post smooth and then put the 3 pieces together. After they are assembled, using a pair of tweezers, push the crimp tube through the hole in the anklet panel until it stops. Now you have modded the anklet, and improved the look of your model.
The crimp tube can be removed for painting, leaving the "seal" chrome or it can be painted to blend in to the anklet. I think I might leave it chrome, but we'll see when final paint goes on.